EXTENSIONS FOR MID FLOW
DruvaTEC® mid flow extension header kits for manifold
This extension header kits are used to increase number of high pressure inlet ports for manifolds in gas supply systems for industrial, inert, flammable, oxidizing gases and gas mixtures. Not suitable for corrosive and/or toxic gases and their mixtures.
TECHNICAL SPECIFICATION
Extension Header Kits were used to connect more than one gas cylinder on each side of the manifold. It can
consist of diaphragm shut-off valve, tubing, inlet and outlet connection. Upon request it can be equipped with
check valves, gauges and vent valves, pressure transmitter and contact gauges. They can be delivered with
up to 4 inlets. The Extension Header Kits are designed for safe handling of high purity gases.
SPECIAL FEATURES
- Up to four additional inlet ports are possible
- Variable, configurable system
- Extension headers are optional equipped with manual actuated diaphragm valve, non return valve, gauge, contact gauge, pressure transmitter
- Complete kits are available
- Valves - developed, tested and produced in accordance with relevant sections of ISO 10297:2015 (including O2 ignition test for the main valve)
- Non Return valves -The special seat seal and the use of selected gas-wetted parts allow the use with Oxygen up to 300 bar
- Electrostatic chargeability test
Fulfills requirements according to ISO 80079-36, IEC TS 60079-32-1 and German TRGS 727
Usable in EX- areas zones 1 and 2 for gases with explosion risk group I, IIA, IIB, IIC
TECHNICAL DATA
| Max. working pressure | 300 bar | |
| Working tempearture | - 40 °C to 60°C | |
| Nominal Flow Rate | 100 m³ / h | |
| Material: | ||
| Body | Brass | |
| Dimensions LxDxH (max): | L030 (recommended for gas cylinders) |
L100 (recommended for gas bundles) |
| 1 inlet | 350 x 109 x 261 | 1050 x 109 x 261 |
| 2 inlets | 650 x 109 x 261 | 2050 x 109 x 261 |
| 3 inlets | 950 x 109 x 261 | 3050 x 109 x 261 |
| 4 inlets | 1250 x 109 x 261 | 4050 x 109 x 261 |
| Specials: | Check Valve – Type CV300 Vent Valve – Type VTLA Check Valve + Vent Valve |
|
| Gauge Type: | Bourdon Tube Inductiv Contact I1 Reed Contact R5 Pressure Transmitter Ex Pressure Transmitter Non-Ex |
|
TECHNICAL DATA - TUBE
| Material | Stainless Steel 1.4404 / 316L |
| Outside Diameter | 1/2“ |
| Wall thickness | 0,065“ |
| Gas wetted surface finish | Outer surface Ra<=1,0 μm Inner surface Ra<=0,8 μm |
| Cleaning | free of oil and grease acc. to ASTM G93 11.4.3.1 - Level AA |
Pobrać dokumentację bezpieczeństwa
Instruction for Use - Extension header rail.pdf
