CONTACT GAUGES KI 63, KR 63 - NPT 1/4"

These pressure measuring instruments have a robust chrome nickel steel housing in safety version in accordance with DIN 16006. When the gas cylinder nears empty and by sinking cylinder pressure an inductive contact switch is activated (KI 63) or respectively a mechanical reed contact (KR 63). The switch point, i.e. the pressure level at which the signal should be triggered, is freely adjustable. Both the gauge KI 63 as well as KR 63 are available with one or two switch points and with different contact types. To set the switch point the pressure level marking is adjusted by turning the beyonetring to the left and removing the viewing glass. The desired value for the switching point is obtained by adjusting the red marking on the outside scale edge. Afterwards the viewing glass is replaced using the bayonet ring.

• Construction conforms to safety regulations the BG- chemical industry
• Switching point freely adjustable
• One or two switching point models
• Pressure display and signal transmission for recording measured data
• Ex-protection is possible in conjunction with corresponding signal
  box SK 60

FOR MORE INFORMATION SEE DATASHEET.