To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.B
Based on the proven heat transfer design of the XHR-300, the XHR-301 allows greater outlet pressures to 150 barvia its piston sensed element. FEATURES ATEX certified to EEx d IIC T3 Dual, independent, 100 W heaters for pre heat and re-heat of sample gas 316SS Piston sensed element for low torque adjustment and high pressure control Large surface area for heat transfer Easy to wire circuit board with 115 V or 230 V supply Stylish Junction
The MINI-300 provides an economical, lightweight, and versatile regulator range, designed for customers who want accurate control from a compact unit.The standard units utilise two piston sensing options to allow pressure control from 5 psi to 1000 psi (and a modified version up to 3000 psi). SPECIAL FEATURES 38 mm diameter body provides small foot space Fully supported ‘sensitive’ pistons with low pressure and high pressure outl
The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ½” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torque a
Certified to ATEX directive 94/9/EC, the XHR-300 helps to maintain saturated gases in their vapourised state due to its unique DUAL heating design. Two 100 W heater cartridges, or steam tubes, are inserted in spiral machined sheaths, which agitate the media to help with the heat transfer and analysis process. The propriety PCB is easy to wire and incorporates an adjustable potentiometer to adjust the temperature setting to the heaters. FEATURES
Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690 bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The seating area can easily be accessed from the base of the regulator for speedy servicing in situ.
A compact and economical high pressure regulator with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar, which can be supplied as none venting or self venting (none adjustable). FEATURES 550 bar / 8000 psi inlet pressure Economical Design Precision machined sensing elements Load bearings and large handwheel for low torque adjustment Excellent sensitivity Self venting and non venting options
Alloy with high silver content (55%) for joining steel/brass/copper pieces. Especially suitable for medical gases, purified gases and in the food industry. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Its excellent fluidity makes it suitable in closely fitting joints as it can penetrate very tight gaps. HVAC, automotive, food and sanitary, electric industry,
Alloy with high silver content (40%) for joining steel/brass/copper pieces. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Water/gas pipes. Climate control systems. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexi
Single-stage line pressure regulator for gases up to purity 6.0. The 4-port version (type 01) Includes a downstream pressure gauge a hand wheel to adjust the line pressure. The 6-port version (type 03) contains an upstream gauge in addition. Optional: a relief valve (AV). Reduces Central Gas Line pressures (upstream) to a lower downstream pressures Suitable for High Pressures up to 300 bar / 4350 psi (Typ FMD530) For inert, reactive, f